3 mins read

how to get moisture out of a scope

Removing moisture from a scope, such as a camera lens or a rifle scope, is essential to prevent fogging and maintain its functionality. Here are steps to help you remove moisture from a scope:

Materials You’ll Need:

  • Silica gel packets or a desiccant
  • Airtight container or bag
  • Lens cleaning cloth (for optical scopes)

Step-by-Step Guide:

  1. Power Off and Remove Batteries (if applicable):
    • If your scope has batteries or electronic components, turn off the power and remove the batteries to prevent electrical damage during the moisture removal process.
  2. Dry Environment:
    • Ensure that you are in a dry environment, preferably indoors, to prevent additional moisture from entering the scope.
  3. Remove the Scope from the Affected Area:
    • Take the scope out of any humid or damp environment. If the scope was exposed to moisture, remove it from the source of moisture immediately.
  4. Use Silica Gel Packets or Desiccant:
    • Place the affected scope and a few silica gel packets or a container of desiccant (a moisture-absorbing material) in an airtight container or bag. The container should be large enough to accommodate the scope without crowding.
  5. Seal the Container:
    • Seal the container or bag tightly to create a moisture-free environment inside. Make sure there is no air leakage.
  6. Wait for Moisture Absorption:
    • Allow the scope to sit in the sealed container with the desiccant for at least 24-48 hours. During this time, the desiccant will absorb the moisture from the scope.
  7. Check the Scope:
    • After the waiting period, carefully inspect the scope for any remaining moisture or fogging. If you still notice moisture, repeat the process until the scope is completely dry.
  8. Clean the Lens (for Optical Scopes):
    • If you are dealing with an optical scope (e.g., camera lens, rifle scope), use a clean lens cleaning cloth to gently wipe the lens surfaces to ensure they are free from any moisture residue or smudges.
  9. Reassemble and Test (if applicable):
    • If your scope has removable components, reassemble them properly. If it’s an electronic scope, insert the batteries and power it on to ensure it’s functioning correctly.
  10. Store Properly:
    • Store your scope in a dry, cool place, and consider using a scope cover or case to protect it from moisture and dust when not in use.

Preventing moisture from entering your scope in the first place is important. If you’re using the scope outdoors in humid or wet conditions, consider using protective covers or seals designed to keep moisture out.

Remember that moisture damage may not always be immediately apparent, so it’s a good practice to periodically check and maintain your scopes, especially if they are frequently exposed to varying environmental conditions.

Also Read:

Leave a Reply